Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front shock absorber of the Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Shocks

It will be possible to replace the front shock absorber of the Fiat Tipo by opening the hood to access the components located inside the engine compartment: here, you will be able to locate the screws that secure the shock absorber from the top. Then, you will need to lift the car to ensure that the front wheel does not touch the ground: the wheel must be removed by loosening its screws, allowing the shock absorber to be freed from the suspension. In this way, the new replacement part can be installed, ensuring that everything works properly.

Posted on 30 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headrests of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Today we will see the instructions that will allow us to disassemble the front and rear headrests of the Fiat Tipo, in simple and quick steps. First …
How to replace the battery of the Fiat Tipo key
Fiat Tipo (2016-2026 / 356, 357, 358) If you want to replace the battery inside the key of your second edition Fiat Tipo by yourself, you must carefully read the following guide and follo…
How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos