Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "TPMS" Light on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next, press the button shaped like a tyre with an exclamation mark located at the bottom left of the steering column.

This will cause the tyre sensors to take a new pressure measurement, turning off the "TPMS" light on your Fiat Tipo, and you will have completed the reset.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Fiat Tipo 356
How to Reset the Tyre Pressure Light on a Fiat Tipo 356
Fiat Tipo (2016-2026 / 358, 356, 357) In today's video, you will see how to reset the tyre pressure light on a Fiat Tipo 356 in simple steps. Before performing the reset operation, ensure…
How to Reset the TPMS Light on the Fiat Tipo
How to Reset the TPMS Light on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In this guide dedicated to your new Fiat Tipo, discover how to correctly reset the tyre pressure monitoring system (TPMS) light without using profess…
How to Reset the TPMS Light in a Fiat Tipo
How to Reset the TPMS Light in a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) To reset the TPMS light in a Fiat Tipo II, insert the key without starting the engine and check that the tyre pressures are correct. Locate the butto…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos