Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Tipo
  6. : How to reset the TPMS warning light on the Fiat Tipo

Fiat Tipo - Video tutorial

Model: Fiat Tipo 358, 356, 357 - Years 2016-2023
Part: Instrument cluster
Operation: How to reset the TPMS warning light on the Fiat Tipo

In this new guide dedicated to your new Fiat Tipo we will find out how to reset the tire warning light correctly and without the use of professional tools. First, go inside the cockpit and make sure all doors are closed. Then start your car and locate the TPMS warning light reset button on the keypad to the left of the steering wheel. At this point, hold it down for a few seconds and as soon as the reset is confirmed, release it and turn off the car to complete the reset. From the next start, the warning light will no longer come on on the panel.


Posted on 10 August 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Fiat Tipo 2016-2023 - What does the yellow engine light on the Fiat Tipo indicate? Read Answer
    • Fiat Tipo 2016-2023 - What does the Fiat Tipo service light indicate? Read Answer
    • Fiat Tipo 2016-2023 - What is the meaning of the Fiat Tipo warning lights? Read Answer
    • Fiat Tipo 2016-2023 - What to do when the check engine light comes on on a Fiat Tipo? Read Answer
    • Fiat Tipo 2016-2023 - Start and stop not available on the Fiat Tipo? Read Answer
    • Fiat Tipo 2016-2023 - What are the yellow warning lights on the Fiat Tipo? Read Answer
    • Fiat Tipo 2016-2023 - How do you manually reset the Fiat Tipo maintenance warning light? Read Answer
    • Fiat Tipo 2016-2023 - What does start & stop not available in the Fiat Tipo mean? Read Answer
    • Fiat Tipo 2016-2023 - What to do if the yellow oil warning light comes on in the Fiat Tipo? Read Answer
    • Fiat Tipo 2016-2023 - What lights does the Fiat Tipo have? Read Answer
    • Fiat Tipo 2016-2023 - What does the Fiat Tipo Start & Stop light indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos