Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

Through these brief instructions, you will learn how to reset the tyre pressure monitoring system (TPMS) warning light on the Fiat Tipo; before performing the reset, ensure all four tyres are at the correct operating pressure. First, get in the vehicle and switch on the ignition by turning the key to position one; then press and hold the TPMS reset button located on the left for a few seconds, so that the warning light resets on the instrument cluster, as shown in the video.

Finally, switch off the ignition and start the engine!


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To reset the tyre pressure warning light on your Fiat Tipo, start by turning on the ignition without starting the engine. Then, locate the button for…
How to reset the tyre pressure warning light on a Fiat Tipo?
How to reset the tyre pressure warning light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To reset the tyre pressure warning light on a Fiat Tipo, first inflate all the tyres to the recommended pressure value. The recommended pressure is w…
Resetting Tyre Pressure Light on Fiat Tipo
Resetting Tyre Pressure Light on Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In this video tutorial, we will see how to reset the tyre pressure light on a Fiat Tipo; before performing the reset operation, it is necessary to ha…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos