Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Instrument Cluster in a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Instrument cluster

How to dismantle the instrument cluster or stereo in a Fiat Tipo? Follow these steps: remove the plastic covering from the top of the instrument cluster, detach it from the dashboard, then unscrew the securing screws located at the sides of the instrument cluster using a screwdriver. Remove the instrument cluster from the dashboard (disconnect the power cable). If you want to remove the stereo: unscrew its securing screws. Once the part is removed, fit a new one. Finally, proceed to reassemble the part following the steps taken previously.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Dashboard of the Fiat Tipo
Guide to Removing the Dashboard of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Here are the main steps to remove and replace the dashboard, which is necessary for removing the heating radiator of the Fiat Tipo. First, get inside…
How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…
How do you reset the Service light of the Fiat Tipo?
How do you reset the Service light of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To completely remove the Service light from the Fiat Tipo instrument panel, you will need to connect a diagnostic tool to the vehicle's OBD port: thi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos