Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster from the Fiat Stilo Dashboard

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument cluster

Video tutorial

Below are the instructions for removing and replacing the instrument cluster from the Fiat Stilo dashboard. First, get into the vehicle and start by removing the plastic cover surrounding the instrument cluster; then unscrew the fastening screws located on its sides, disconnecting the electrical wiring found at the back, as shown in the video.

At this point, carry out the repair or replacement of the instrument cluster, reconnecting the electrical wiring; check its correct operation before reassembling everything!


Posted on 17 February 2026 by ScegliAuto


Related tutorials

Removing the Instrument Cluster from a Fiat Stilo
Removing the Instrument Cluster from a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In today's tutorial, you will learn how to remove the instrument cluster from a Fiat Stilo in simple steps. First, get inside the car and remove the …
Where is the OBD port of the Fiat Stilo located?
Where is the OBD port of the Fiat Stilo located?
Fiat Stilo (2001-2010 / MK 1) To find the OBD port of your Fiat Stilo, it only takes a few seconds. All you have to do is carefully read the following guide and then follow the va…
Removing the Steering Wheel Airbag on Fiat Stilo
Removing the Steering Wheel Airbag on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In today's tutorial video, you will see how to remove the steering wheel airbag on a Fiat Stilo, following the instructions below. First, get inside …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos