Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Fiat Stilo located?

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Dashboard

To find the OBD port of your Fiat Stilo, it only takes a few seconds. All you have to do is carefully read the following guide and then follow the various steps described. First, open the driver's side door and reach the driver's seat inside the cabin, then proceed to remove the small compartment located to the left of the steering wheel, at the bottom of the dashboard. Once the cover of the compartment in question is removed, locate the OBD port you were looking for and connect any diagnostic tool compatible with your Fiat Stilo.

Posted on 20 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Fiat Stilo?
Where is the fuse box located in the Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) If you don't yet know where the box containing all the various fuses of your Fiat Stilo is located, don't worry because in the following mini guide y…
Where are the fuses located in the Fiat Stilo?
Where are the fuses located in the Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) The fuses in the Fiat Stilo are contained within dedicated fuse boxes installed inside the vehicle: this model has two. The first is located behind t…
Where is the Fuse Box of the Fiat Stilo?
Where is the Fuse Box of the Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) In this guide regarding the Fiat Stilo, discover where the car's fuse box is located. Before proceeding, ensure the car is completely off and parked …

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos