Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Steering Wheel on Fiat Stilo

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Steering wheel

Video tutorial

In this tutorial, learn how to remove the steering wheel, along with the airbag, on a Fiat Stilo in simple steps. First, get inside the vehicle and remove the airbag screws located behind it using a T30 Torx key; then extract the airbag and gently disconnect its electrical connector, as shown in the video.

Next, unscrew the central bolt of the steering wheel using a socket wrench with an extension; remove the steering wheel in the straight position and replace it with the correct new one!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Removing the Steering Wheel Airbag on Fiat Stilo
Removing the Steering Wheel Airbag on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In today's tutorial video, you will see how to remove the steering wheel airbag on a Fiat Stilo, following the instructions below. First, get inside …
Removing the Rear Seats on a Fiat Stilo
Removing the Rear Seats on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Remove the rear seats fitted in a Fiat Stilo. First, take off the metal guides at both ends of the backrest (mounted on the car's body), using plasti…
How to Remove the Steering Wheel on Fiat Stilo
How to Remove the Steering Wheel on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) To remove the steering wheel airbag on a Fiat Stilo, follow these instructions. Unscrew the securing screws at the back of the steering wheel (the ai…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos