Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Glove Compartment of a Fiat Stilo?

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Dashboard

To start, open the glove compartment. Next, disconnect the internal bulb using a flathead screwdriver and unplug the connector attached to it. Once you have successfully removed the internal bulb, begin unscrewing all the screws inside the glove compartment. To make this operation easier, it is possible, but not mandatory, to press the two tabs on the supports of the door, allowing it to lower further. Once all the screws are removed, you can extract the glove compartment without any issues. When it is fully extracted, the disassembly of the glove compartment will be successfully completed.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Stilo (2001-2010 / MK 1) Start by opening the glove compartment. Next, disconnect the internal bulb using a flathead screwdriver and unplug the connector attached to it. Once…
Fiat Stilo (2001-2010 / MK 1) To find the OBD port of your Fiat Stilo, it only takes a few seconds. All you have to do is carefully read the following guide and then follow the va…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos