Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio in the Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Car stereo

In this tutorial, you will see how to remove the car radio in the Fiat Tipo, a very simple and quick operation. First, ensure the key is not inserted, then unclip the entire dashboard trim, which also extends over the instrument cluster, using a plastic spatula to avoid damaging any components. Next, unscrew the 4 mounting bolts of the radio located at the corners, pull it out, and disconnect the various rear connectors. Fitting the replacement will be just as simple; just follow the reverse procedure.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Original Radio Fitted in a Fiat Tipo
How to Remove the Original Radio Fitted in a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) How to remove the original radio fitted in a Fiat Tipo? Carefully follow this video guide for the removal process. Remove the plastic trim surroundin…
How to Remove the Original Radio from a Fiat Tipo
How to Remove the Original Radio from a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) How to remove the original radio from a Fiat Tipo. First, use a plastic lever to remove the trim around the radio, then, using the lever again, unscr…
How to Remove the Original Radio from a Fiat Tipo
How to Remove the Original Radio from a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Here’s how to remove the original radio from a Fiat Tipo: Use a plastic lever to remove the trim surrounding the radio, then use a screwdriver to uns…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - Why does the Fiat Tipo Uconnect system not work? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos