Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Instrument cluster

In today's video, you will see how to replace the instrument cluster on the Fiat Tipo; specifically, you will switch from one that displays km/h to one that displays miles. Release the plastic trim around the instrument cluster. Now, do the same behind the radio screen. Disconnect the connector and unscrew the screws holding the screen in place. Pull it away and unscrew the two remaining screws that secure the plastic cover of the instrument cluster. Now unscrew the screws holding the instrument cluster and remove it. You can replace it with the new unit, following the steps outlined earlier.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Instrument Cluster in a Fiat Tipo
How to Dismantle the Instrument Cluster in a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) How to dismantle the instrument cluster or stereo in a Fiat Tipo? Follow these steps: remove the plastic covering from the top of the instrument clus…
How to Reset the Service Light on a Fiat Tipo?
How to Reset the Service Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the Service light on a Fiat Tipo, you must first change the oil and the corresponding filter as indicated in the tutorial. Next, enter the c…
How to Reset the Oil Warning Light on a Fiat Tipo?
How to Reset the Oil Warning Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the oil warning light on a Fiat Tipo, turn the key in the ignition switch to power on the instrument cluster. Once the instrument cluster is…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos