Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on a Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Tire pressure warning light

To reset the tyre pressure warning light on a Fiat Tipo, first inflate all the tyres to the recommended pressure value. The recommended pressure is written on the sticker located inside the driver's door pillar. Once all the tyres are at the correct pressure, turn on the ignition and press the button located at the bottom left of the steering wheel. While holding the button with the low tyre pressure icon, the warning light will turn off.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Fiat Tipo
How to Reset the Tyre Pressure Light on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) How do you reset the tyre pressure light on the Fiat Tipo? Turn on the ignition and reset the light. Press the "Set" button located on the left side …
Resetting Tyre Pressure Light on Fiat Tipo
Resetting Tyre Pressure Light on Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this video tutorial, we will see how to reset the tyre pressure light on a Fiat Tipo; before performing the reset operation, it is necessary to ha…
Resetting the Tyre Pressure Warning Light on a Fiat Tipo
Resetting the Tyre Pressure Warning Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this guide, we will see the instructions that will allow us to reset the tyre pressure warning light on the Fiat Tipo; before performing the reset…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos