Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headrests of the Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
This video is currently unavailable

Today we will see the instructions that will allow us to disassemble the front and rear headrests of the Fiat Tipo, in simple and quick steps. First of all, we get on board the car and start pressing and holding the buttons that we find on the base of the headrest clips; then we pull out the front headrest at the same time, in order to remove it, as shown in the video.

At this point, we replace and reassemble the headrest, adjusting it to the desired height; in the same way, we will proceed to disassemble all the other headrests of the car seats!


Posted on 11 February 2025 by ScegliAuto


Related tutorials

How to Fold Down the Rear Seats on the Fiat Tipo?
How to Fold Down the Rear Seats on the Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To fold down the rear seats on the Fiat Tipo, pull the seat bench forward using the lever underneath. Once the seat bench is fully pulled forward, lo…
How to remove the rear light and bulbs of the Fiat Tipo
How to remove the rear light and bulbs of the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In this brief and simple guide, you will learn the steps to remove and replace the rear light and its bulbs on the Fiat Tipo. First, open the boot li…
How to Remove the Car Radio in the Fiat Tipo?
How to Remove the Car Radio in the Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) In this tutorial, you will see how to remove the car radio in the Fiat Tipo, a very simple and quick operation. First, ensure the key is not inserted…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos