Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Brake pads

To replace the front brake pads on a Fiat Tipo, lift the car using a jack or ramp so that the corresponding wheel is off the ground. Next, loosen the bolts securing the wheel to the hub, completely removing it to access the components at the rear. Once the wheel is off, unscrew the bolts holding the brake caliper to its disc, fully removing it and sliding out the pads inside. You can then insert the new pads, refitting the caliper and the wheel.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Fiat Tipo 1.6 Multi-Jet
How to Replace the Front Brake Pads on a Fiat Tipo 1.6 Multi-Jet
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, lift the front of your Fiat Tipo 1.6 Multi-Jet. Begin by removing the front wheel by unscrewing the fixing bolts. Next, unscrew and…
How to Replace the Front Brake Pads on a Fiat Tipo?
How to Replace the Front Brake Pads on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) .. In this tutorial, you will see how to replace the front brake pads on a Fiat Tipo. This is a simple operation but requires attention... …
How to Replace the Front Brake Pads of the Fiat Tipo?
How to Replace the Front Brake Pads of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) You can replace the front brake pads on the Fiat Tipo by lifting the car so that the corresponding wheel is not in contact with the ground: once the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos