Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Brake pads

To replace the brake pads on your vehicle, follow the instructions below. First, remove the wheel to access the two bolts securing the caliper. Once the caliper is removed from the brake disc, you can take out the old brake pads. Take the new brake pads and position them in their place, then refit the caliper and tighten the securing bolts. Next, repeat the same procedure to replace the brake pads on the other axle.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Fiat Tipo?
How to Replace the Rear Brake Pads on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the rear brake pads on a Fiat Tipo, lift the car using a jack so that the corresponding wheel is off the ground. After removing the wheel …
How to Replace the Front Brake Pads of the Fiat Tipo?
How to Replace the Front Brake Pads of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) You can replace the front brake pads on the Fiat Tipo by lifting the car so that the corresponding wheel is not in contact with the ground: once the …
How to Replace the Front Brake Pads on a Fiat Tipo?
How to Replace the Front Brake Pads on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the front brake pads on a Fiat Tipo, lift the car using a jack or ramp so that the corresponding wheel is off the ground. Next, loosen the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos