Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Brake pads

In this tutorial, you will see how to replace the front brake pads on a Fiat Tipo. This is a simple operation but requires attention. Start by lifting the front of the vehicle, taking the necessary safety precautions. Next, remove the wheel on the side you will be working on. Loosen the upper bolt of the brake caliper and remove the lower one. Then, lift the caliper and secure it to the suspension. Remove the old pads and clean any dirt residue. Finally, position the new parts, reassemble everything, and check the fluid level. If necessary, bleed any air from the system using the appropriate valves.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads of the Fiat Tipo?
How to Replace the Front Brake Pads of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) You can replace the front brake pads on the Fiat Tipo by lifting the car so that the corresponding wheel is not in contact with the ground: once the …
How to Replace the Front Brake Pads on a Fiat Tipo 1.6 Multi-Jet
How to Replace the Front Brake Pads on a Fiat Tipo 1.6 Multi-Jet
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, lift the front of your Fiat Tipo 1.6 Multi-Jet. Begin by removing the front wheel by unscrewing the fixing bolts. Next, unscrew and…
How to Replace the Front Brake Pads on a Fiat Tipo?
How to Replace the Front Brake Pads on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the front brake pads on a Fiat Tipo, lift the car using a jack or ramp so that the corresponding wheel is off the ground. Next, loosen the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos