Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Shoes on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake pads

See other generations:
Video tutorial

In this video tutorial, see how to replace the rear brake shoes on a second-generation Fiat Panda, produced from 2003 to 2012. First, lift the vehicle and remove the rear wheel. Next, unscrew the two screws of the brake drum using a 12mm spanner.

After this, loosen the rear brake cable inside the cabin to remove the shoes more easily. Now remove the brake shell to extract the two shoes and replace them with new ones by following the reverse procedure.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Shoes on a Fiat Panda
How to Replace the Rear Brake Shoes on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear brake shoes on a Fiat Panda, lift the car with a jack or ramp so that the corresponding rear wheel is not in contact with the gro…
How to Replace the Rear Drum and Shoes on a Fiat Panda 169
How to Replace the Rear Drum and Shoes on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, learn how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, remove the rear wheel; then unsc…
Replacing Rear Brake Shoes on Fiat Panda 169
Replacing Rear Brake Shoes on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, lift the vehicle and remove the rear wheel…

    Frequently Asked Questions

    • Panda 2012-2026 - How much does it cost to replace the rear brake pads on a Fiat Panda? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos