Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Clutch on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Clutch

Today, follow these main steps to remove and replace the clutch kit on a Fiat Panda. First, lift the vehicle and remove the front right wheel. Next, undo the central nut to detach the brake assembly from the front driveshaft; then disconnect the arm pin and unscrew the bolts at the base of the front driveshaft. Now, drain the gearbox oil by unscrewing the bolt; remove the gearbox by unscrewing its bolts, thus replacing the clutch kit!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch of the Fiat Panda?
How to Replace the Clutch of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the clutch of the Fiat Panda, lift the car with a jack so that the front wheels are off the ground. At this point, you can access the comp…
How to Replace the Clutch on a Fiat Panda
How to Replace the Clutch on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the clutch on a Fiat Panda, you will need to lift the car using a ramp to access the components underneath: loosen the bolts securing the …
Replacing the Clutch on the Fiat Panda 1.4
Replacing the Clutch on the Fiat Panda 1.4
Fiat Panda (2003-2012 / 169, MK 2) This guide will illustrate the procedure for removing and replacing the clutch on the Fiat Panda 1.4. First, open the bonnet and start by removing th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos