Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Clutch

See other generations:
Video tutorial

To replace the clutch on a Fiat Panda, you will need to lift the car using a ramp to access the components underneath: loosen the bolts securing the front right wheel, remove the wheel and the associated arm. This will allow you to access the clutch cover and loosen its securing bolts.

Once done, the cover can be completely removed, and the clutch inside can be replaced.

After the replacement, reattach the cover and all the other parts removed earlier.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to replace the clutch of the Fiat Panda
How to replace the clutch of the Fiat Panda
Fiat Panda (2012-2023 / ) Today we will explain how to replace the clutch of the 2014 Fiat Panda. We start the disassembly by disconnecting the car's battery, opening the oil …
Removing Clutch from Fiat Panda
Removing Clutch from Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, you will see how to remove the clutch from a Fiat Panda. Lift the vehicle with axle stands and remove the front wheels by …
How to Replace the Clutch of the Fiat Panda?
How to Replace the Clutch of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the clutch of the Fiat Panda, lift the car with a jack so that the front wheels are off the ground. At this point, you can access the comp…

    Frequently Asked Questions

    • Panda 2003-2012 - How much does it cost to replace the Fiat Panda clutch? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos