Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch on the Fiat Panda 1.4

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Clutch

See other generations:
Video tutorial

This guide will illustrate the procedure for removing and replacing the clutch on the Fiat Panda 1.4. First, open the bonnet and start by removing the battery and battery tray, unscrewing the fixing screws and disconnecting the two terminals; then, unscrew the bolts of the engine mount located underneath, using a socket spanner with an extension, as shown in the video.

At this point, raise the vehicle and remove the front wheel; disconnect the driveshaft and unscrew the bolts of the gearbox, thus accessing the clutch kit for replacement!


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Fiat Panda
How to Replace the Clutch on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the clutch on a Fiat Panda, you will need to lift the car using a ramp to access the components underneath: loosen the bolts securing the …
How to Replace the Clutch of the Fiat Panda?
How to Replace the Clutch of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the clutch of the Fiat Panda, lift the car with a jack so that the front wheels are off the ground. At this point, you can access the comp…
How to replace the clutch of the Fiat Panda
How to replace the clutch of the Fiat Panda
Fiat Panda (2012-2023 / ) Today we will explain how to replace the clutch of the 2014 Fiat Panda. We start the disassembly by disconnecting the car's battery, opening the oil …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much does it cost to replace the Fiat Panda clutch? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos