Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine Mount Reaction Link in the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Engine mount

Today, let’s see how to remove the engine mount reaction link from its seat in the second series of the Fiat Panda, the 169. First, gather a jack or, preferably, support stands. Locate the part in the central and front section of the vehicle. Lift the car using the support stands. Once located, remove the two 19 mm fixing bolts. Also, take off the bolt with the nut using a spanner. Now the reaction link has been removed. To reinstall the part, follow the previous steps in reverse and you're done. As you can see, it’s a fairly straightforward operation.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the stabilizer bar on the Fiat Panda 169
How to replace the stabilizer bar on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video we can see how to replace the stabilizer link on a Fiat Panda 169: first, we lift the car so we can remove the wheel. Once this operati…
Replacing the Engine Mount on the Gearbox Side of the Fiat Panda 169
Replacing the Engine Mount on the Gearbox Side of the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video, see how to remove and replace the engine mount on the gearbox side of the Fiat Panda 169, following the instructions below. First, ope…
How to Replace the CV Boot on a Fiat Panda?
How to Replace the CV Boot on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, see how to replace the CV boot on a Fiat Panda. First, lift the front of the vehicle with a jack, taking all necessary precautions.…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos