Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Mount on a Fiat Panda 1.2 Petrol

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Engine mount

In today's video tutorial, you will see the main steps to dismantle and replace the engine mount on a Fiat Panda 1.2 petrol. First, open and lift the bonnet of the car and remove the engine battery along with the battery tray, disconnecting the two terminals (positive and negative); at this point, access the engine mount where you will remove the central bolt and the two side bolts using a socket spanner: once removed, replace the engine mount with the original one. Now reassemble everything by applying the reverse procedure!

Updated on 12 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by …
How to Replace the Fuel Filter on a Fiat Panda
How to Replace the Fuel Filter on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Before you can start, open the bonnet of your Fiat Panda. Begin by unscrewing and removing the bolt that tightens the clamp securing the fuel filter.…
Guide to replacing the timing belt of the Fiat Panda 1.2
Guide to replacing the timing belt of the Fiat Panda 1.2
Fiat Panda (2003-2012 / 169, MK 2) In this guide, we will see the main instructions useful for disassembling and replacing the timing belt of the Fiat Panda 1.2 petrol. First of all, w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos