Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace or Repair the Fuel Pump on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuel pump

Let’s see how to replace or repair the fuel pump on a Fiat Panda. Disconnect the battery cables, then remove the rear seats of the car. You will find the wiring and a metal piece with screws that need to be removed. Use a socket spanner to undo the screws securing the metal cap, and remove it from its seat. Wrap the entire perimeter of the metal sheet with absorbent paper, then use a chisel to undo the large securing pin. If you want to repair the fuel pump: seal any leaks with suitable adhesive as shown in the video. Extract the floating fuel pump if it needs replacing.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by …
How to Replace the Fuel Pump Relay on a Fiat Panda
How to Replace the Fuel Pump Relay on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the front bonnet of your Fiat Panda. The fuel pump relay is located inside the fuse box, which is in the engine compartment nea…
Removing the Fuel Pump from a Fiat Panda
Removing the Fuel Pump from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to replace the fuel pump on a Fiat Panda. First, you need to remove the rear seats as the pump is located …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos