Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Fuel pump

Before you can start, open the rear hatch of the luggage compartment of your Fiat Panda. Begin by folding down the rear seats, then move the carpet in the luggage compartment. This will give you access to the well, where the fuel pump is located. Proceed by disconnecting and removing the cover of the well, and you will reach the fuel pump. After that, disconnect the electrical connector attached to the filter inside the fuel pump, then remove the filter itself. At this point, disconnect the hoses and unscrew the bolts that secure the fuel pump, then dislodge the fuel pump itself. Once you complete this step, you can remove the fuel pump, and you will have completed the disassembly.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's main steps will show us how to disassemble and replace the fuel pump of the Fiat Panda, following the instructions below. First, we open the …
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by …
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will learn how to remove and replace the fuel pump or low-pressure fuel sender on a Fiat Panda 4x4 (169). First, open the rear …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos