Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Fuel Pump on the Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Fuel pump

See other generations:
Video tutorial

This guide will provide the main instructions for removing and replacing the fuel pump on the Fiat Panda. First, access the rear of the vehicle and start by removing the rear seat; then remove the cover and disconnect the fuel line, as shown in the video.

At this point, unscrew the fastening screws of the metal partition to extract the fuel pump from the tank, allowing you to remove and replace it with the new one; then reassemble and make the necessary connections, following the video tutorial to the end!


Updated on 18 August 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump and Float on a Fiat Panda 169
Replacing the Fuel Pump and Float on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video guide, you will learn how to disassemble and replace the fuel float pump on a Fiat Panda 169. First, remove the bolts from the rear sea…
Replacement of the fuel pump of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's main steps will show us how to disassemble and replace the fuel pump of the Fiat Panda, following the instructions below. First, we open the …
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos