Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the fuel pump of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuel pump

Today's main steps will show us how to disassemble and replace the fuel pump of the Fiat Panda, following the instructions below. First, we open the rear doors and start disassembling and removing the rear seat, pulling it upwards; then we will find the fuel pump underneath, where we will disconnect the fuel line and the electrical connector of the fuel level sensor, as shown in the video. At this point, we unscrew the ring to remove and replace the pump with the new original one, finally reassembling everything!

Posted on 8 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will learn how to remove and replace the fuel pump or low-pressure fuel sender on a Fiat Panda 4x4 (169). First, open the rear …
Replacing the Fuel Pump and Float on a Fiat Panda 169
Replacing the Fuel Pump and Float on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video guide, you will learn how to disassemble and replace the fuel float pump on a Fiat Panda 169. First, remove the bolts from the rear sea…
How to Remove the Fuel Pump from a Fiat Panda
How to Remove the Fuel Pump from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the fuel pump from a Fiat Panda? Start by disconnecting the battery cables, then remove the rear seat cushions of the car. Use a socket…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos