Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling Fuel Pump on Fiat Panda 1.2 Petrol

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by unscrewing the two bolts with a 15 mm spanner; open the boot and remove the carpet to access the bolts of the backrest and remove it. At this point, access the fuel pump cover; remove it and disconnect the electrical connector of the pump and the fuel inlet pipe: then, unscrew the locking ring counterclockwise and remove the pump!


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump from a Fiat Panda
How to Remove the Fuel Pump from a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Before you can start, open the rear hatch of the luggage compartment of your Fiat Panda. Begin by folding down the rear seats, then move the carpet i…
Guide to Replacing the Fuel Pump on the Fiat Panda
Guide to Replacing the Fuel Pump on the Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) This guide will provide the main instructions for removing and replacing the fuel pump on the Fiat Panda. First, access the rear of the vehicle and s…
How to Replace or Repair the Fuel Pump on a Fiat Panda
How to Replace or Repair the Fuel Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let’s see how to replace or repair the fuel pump on a Fiat Panda. Disconnect the battery cables, then remove the rear seats of the car. You will find…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos