Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuel pump

How to remove the fuel pump from a Fiat Panda? Start by disconnecting the battery cables, then remove the rear seat cushions of the car. Use a socket to unscrew the bolts securing the metal cap and remove it from its seat. Use absorbent paper around the perimeter to soak up any liquid leaks. Unscrew the large securing pin of the fuel pump with a chisel, disconnect the power connectors and the liquid circulation tubes. Extract the fuel pump from the car's tank along with the attached parts. Finally, fit a new piece.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's main steps will show us how to disassemble and replace the fuel pump of the Fiat Panda, following the instructions below. First, we open the …
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by …
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will learn how to remove and replace the fuel pump or low-pressure fuel sender on a Fiat Panda 4x4 (169). First, open the rear …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos