Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper from Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Front bumper

See other generations:
Video tutorial

In this video tutorial, you will see how to remove the front bumper from a first-generation Fiat Panda. First, remove the wheel arch liners by unscrewing the screws (four in total): then remove the bumper by disengaging it from the rear clips.

To replace it, remove the old number plate by unscrewing the screws from the rear number plate holder: then mount it onto the new bumper. At this point, you can reassemble everything by gently attaching it first and then screwing all the screws back in and remounting the wheel arch liners!


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Removing the Front Bumper from a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Hello everyone! In this tutorial, you will learn how to remove the front bumper from an old model Fiat Panda. Although it is possible to remove the b…
How to Remove the Front Bumper of a Fiat Panda
How to Remove the Front Bumper of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the front bonnet of your Fiat Panda. Begin by removing the front grille by unscrewing the relevant fixing screws. Next, unscrew…
How to Remove the Rear Bumper from a Fiat Panda
How to Remove the Rear Bumper from a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Removing the rear bumper from your Fiat Panda may seem like a complex task, but you can complete it easily by following this procedure. First, park y…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos