Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wing on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Front bumper

Lift the bonnet and insert the support rod. Start by removing the front grille secured by 4 cross-head screws located above it. This will expose three Torx bolts securing the top of the front bumper: unscrew them. Next, unscrew the bolts securing the wing at the top. By opening the door, you will be able to unscrew the two bolts securing it laterally, as shown in the video. Remove the wheel arch liner and unscrew the two bolts connecting the wing to the bumper. To create space, unscrew or loosen the lower and upper bolts of the bumper so you can move it and then remove the wing.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Wing on Fiat Panda
Removing Front Wing on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This video shows you how to remove the left wing of the Fiat Panda 169. First, open the bonnet and remove the three screws located on the bodywork at…
Replacing the Belts on a Fiat Panda
Replacing the Belts on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the belt at the indicated mileage in the service book. Here’s how to remove the belts on a second series Fiat Panda. Lift the car on a column…
How to Remove the Windscreen Washer Pump of a Fiat Panda
How to Remove the Windscreen Washer Pump of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let’s see how to remove the windscreen washer pump of a Fiat Panda. Using a screwdriver, undo the screws of the right splash guard and remove it from…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much does it cost to replace the front bumper on a Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos