Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
169, MK 2
- Years 2003-2012 To remove the fender of the Fiat Panda, we start by unscrewing the 3 bolts of the fender by opening the engine hood; we open the door next to the fender, unscrew the top bolt (visible from the outside) and the bottom bolt (visible from inside the car); we unscrew the bolt located at the bottom of the fender; we unscrew the bolt that holds the fender attached to the bumper (to unscrew it, the inner fender liner must be removed by unscrewing a nut and two screws); after removing the screw, we widen the bumper and find 2 more bolts that we unscrew; once the last 2 bolts are unscrewed, we remove the fender, but not before disconnecting the turn signal cable. To install the new fender, we perform the reverse procedure compared to the disassembly.
Posted on 15 August 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to replace the AdBlue tank on Peugeot 3008In order to replace the AdBlue tank on the car it is necessary to know that it is located above the diesel tank and therefore under the rear trunk floor and to access it it is necessary: first of all lift the car on the deck, then remove the lower metal protective casing of the tank and under it we will find the diesel tank. Then proceed to disassemble the tank with the help of a forklift to support it. Once the diesel tank has been freed and lowered, above it we will find the small AdBlue tank. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |