Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Wing on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012

This video shows you how to remove the left wing of the Fiat Panda 169. First, open the bonnet and remove the three screws located on the bodywork at the top of the affected side (of the wing). Next, unscrew the Torx screw from the wheel arch. Finally, by opening the car door, you will find two screws: one located at the bottom of the bodywork and one at the top near the wing mirror. Lastly, remove the final bolt at the bottom of the wing. Now pull the wing towards you to extract it!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Wing of the Fiat Panda 169
How to Remove the Wing of the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) To remove the wing of the Fiat Panda, start by unscrewing the 3 bolts of the wing by opening the bonnet. Open the door next to the wing, unscrew the …
Replacing the Wing on a Fiat Panda
Replacing the Wing on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Lift the bonnet and insert the support rod. Start by removing the front grille secured by 4 cross-head screws located above it. This will expose thre…
Replacing the Front Headlight on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, we will see how to remove and replace the front headlight on a second series Fiat Panda by following these simple steps. First, open t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos