Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to replace the daylight bulb of the Fiat Panda.

Fiat Panda - Video tutorial

Model: Fiat Panda MK 3, 319 - Years 2012-2023
Part: Light bulb
Operation: How to replace the daylight bulb of the Fiat Panda.

Replacing the daytime running light of the Fiat Panda is a very simple operation that can be done independently. With the help of this short video, we will explain step by step what to do. First, we turn the steering wheel in the opposite direction of the bulb to be replaced and remove the inner cover of the wheel arch. Once the wheel arch is removed, we can disconnect the connector, being very careful not to damage the wires, and remove the old bulb. Now we can install the new bulb and its corresponding connector. We reassemble the wheel arch cover and make sure the new light is functioning correctly before driving on the road.


Posted on 4 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2012-2023 - Why do the position lights of the Fiat Panda always remain on? Read Answer
    • Panda 2012-2023 - Which bulb does the third series Fiat Panda fit for its position lights? Read Answer
    • Panda 2003-2012 - How to replace the Fiat Panda sidelights bulb? Read Answer
    • Panda 2012-2021 - What does the yellow warning light with triangle and exclamation point mean in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How to replace the light bulbs of the air conditioning knobs in Fiat Panda 169? Read Answer
    • Panda 2003-2012 - How do i replace the sidelights bulbs on the Fiat Panda? Read Answer
    • Panda 2012-2023 - Why did the warning light come on with a yellow triangle and an exclamation point in the Fiat Panda? Read Answer
    • Panda 2003-2012 - What does the yellow warning light with an exclamation point in a triangle mean in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read Answer
    • Panda 2003-2012 - Where is the reverse light located in Fiat Panda? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos