Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Light on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

Here’s how to replace the boot light on a Fiat Panda: First, you can find these specific bulbs on Amazon for £9.99 for a pack of 4 T10 W5W bulbs, with free shipping. Then, use a screwdriver to apply pressure and remove the bulb holder and bulb from the boot of the Panda.

Remove the transparent cover and take out the bulb you wish to replace. Take your LED bulb and fit it in place of the old one. Moreover, despite the car being relatively new, the bulb holder is already slightly burnt out because the standard bulb generates a lot of heat.

Close everything up and refit it, starting from the right side and then the left. It’s much brighter now and doesn’t generate heat since it’s LED.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

Replacing the Number Plate Bulbs of the Fiat Panda
Replacing the Number Plate Bulbs of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's instructions will briefly show you how to remove and replace the number plate bulbs of the Fiat Panda. First, move to the rear of the vehicle…
How to Fix the Boot Button Light Issue on the Fiat Panda 169
How to Fix the Boot Button Light Issue on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This brief video will explain how to replace the boot light bulb and the mechanism that allows it to turn on. To change the bulb located on the boot …
How to Replace the Front Position Bulb in the Fiat Panda
How to Replace the Front Position Bulb in the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide provides information on the procedure for removing and replacing the front position bulb in the Fiat Panda's headlamp. First, open the bon…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos