Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Bumper

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Body

Car bumpers often suffer damage, either due to the actions of other drivers or due to the owner's inattention or misfortune. Knowing how to remove a bumper and independently source a replacement part undoubtedly ensures significant cost savings. This guide shows how to change it. Open the boot lid; there will likely be small plastic caps near the loading threshold. These conceal the screws securing the rear bumper. For the front bumper, the screws are usually located in the wheel arch area. Once the securing screws are removed, carefully lift the bumper slightly upwards. This will release the plastic clips that hold it to the other body panels. Once the bumper is detached, take care to disconnect the electrical connectors for the fog lights and possibly the parking sensors.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fit the Rear Bumper on a Fiat Panda
How to Fit the Rear Bumper on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you fit a rear bumper on a Fiat Panda? Follow these steps; it's not too complex if done methodically. First, grab the bumper and position it p…
How to Fit a Front Bumper on Fiat Panda
How to Fit a Front Bumper on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) How do you fit a front bumper on Fiat Panda? Follow these steps, which are not too complex if done in order. First, take the bumper and position it p…
How to Remove/Reassemble a Bumper on a Fiat Panda
How to Remove/Reassemble a Bumper on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you remove the rear bumper of a Fiat Panda? Let's see how to proceed together; this operation is not too complex. First, take a star screwdriv…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the inertia switch on the Fiat Panda? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos