Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Rear Bumper on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

How do you fit a rear bumper on a Fiat Panda? Follow these steps; it's not too complex if done methodically. First, grab the bumper and position it perfectly against the car body, then, using a socket wrench, tighten the securing bolts at the front of the bumper.

Next, start tightening the bolts around the wheel arch liners. After securing the bolts around the bumper, tighten the bolts underneath the car, between the chassis and the bumper.

Finally, check the correct fitting of the bumper in all its parts.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Fiat Panda
How to Remove the Rear Bumper of the Fiat Panda
Fiat Panda (2012-2021 / ) To remove the rear bumper of the Fiat Panda, loosen all the screws and pull out the rivets that secure the bumper to its housing. All these fastening…
How to Remove the Rear Bumper from a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Before you can start, exit the cabin of your Fiat Panda and head to the rear of the car. Begin by unscrewing and removing the bolts that secure the l…
How to Remove the Rear Bumper of the Fiat Panda?
How to Remove the Rear Bumper of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the rear bumper of the Fiat Panda, first loosen the bolts located inside the wheel arches of the rear wheels. Next, unscrew the screws loca…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos