Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove/Reassemble a Bumper on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

How do you remove the rear bumper of a Fiat Panda? Let's see how to proceed together; this operation is not too complex. First, take a star screwdriver and a suitable spanner, then start unscrewing the screws around the perimeter of the bumper.

After unscrewing the screws around the splash guard, use an 8mm spanner to unscrew the bolts underneath the car, between the chassis and the bumper. Finally, grasp the piece to be removed with your hands and pull it away from the bodywork.

For the bumper assembly, position the bumper perfectly on the car's skeleton and screw in all the bolts and screws present.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Fit a Front Bumper on Fiat Panda
How to Fit a Front Bumper on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) How do you fit a front bumper on Fiat Panda? Follow these steps, which are not too complex if done in order. First, take the bumper and position it p…
How to Install a Reverse Camera on a Fiat Panda
How to Install a Reverse Camera on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To install the parking reverse camera on your vehicle, start by measuring the midpoint of the rear bumper with a tape measure. Next, begin mounting t…
Removing the Front Bumper from Fiat Panda
Removing the Front Bumper from Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) In this video tutorial, you will see how to remove the front bumper from a first-generation Fiat Panda. First, remove the wheel arch liners by unscre…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos