Do it yourself
Frequently asked questions about cars and motorcycles

How to Fit Roof Bars on the Fiat Panda Version 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Body

In this video, see how to fit roof bars on the Fiat Panda version 169: we have already installed the cross bars on our car (also known as "rails"), while the roof bars are also referred to as "cross bars". When fitting these bars, be aware that you may experience drag, wind noise, and various sounds. They can be found on eBay for £69.90 with code 302708638056, with free delivery. First, install the outer blocks of the aluminium cross bar, which fits into the plastic guide, ensuring it also enters from the other side. Tighten the bolts to secure it, place the cover block, close it with the key, and fit the cap onto the bar.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) In this video, learn how to install roof bars, or longitudinal bars, on a Fiat Panda 169 in simple and quick steps. First, remove the rubber screws f…
Fiat Panda (2003-2012 / 169, MK 2) This video shows how to fit roof bars on a Fiat Panda 169. This operation can be done without a mechanic and involves a few simple steps. Use a cross…
Fiat Panda (2003-2012 / 169, MK 2) As shown in this tutorial, fitting roof bars on a Fiat Panda is an extremely simple and quick operation. First, locate the 4 plastic caps on the side…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the inertia switch on the Fiat Panda? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos