Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to remove the left front door panel on Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Bodywork
Operation: How to remove the left front door panel on Fiat Panda

In this video we can see how to remove the left front door panel on Fiat Panda W169. First we open the left front door of the Fiat Panda; then the first thing we have to do will be to remove the internal plastic protection where the mirror on the left side of the vehicle is, leaving the mirror intact without removing it. Then we have to disassemble the part where the twitter is housed and the part that is nearby in plastic where under it we can find a Allen screw, as shown in the video. Under the handle we have to unscrew a Allen screw; under the panel there are two Phillips screws that we must unscrew; once all the screws have been unscrewed, we are going to detach the door panel.


Posted on 15 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Panda 1980-2003 - How much does it cost to repaint the Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does it cost to repaint the bodywork of the Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does it cost to repaint the Fiat Panda? Read Answer
    • Panda 2012-2021 - How much does it cost to repaint the Fiat Panda 4x4? Read Answer
    • Panda 2003-2012 - How much does it cost to repaint a small car? Read Answer
    • Panda 2003-2012 - Where is the inertia switch on the Fiat Panda? Read Answer
    • Panda 2012-2023 - How many seats does the Fiat Panda have? Read Answer
    • Panda 2003-2012 - How much does it cost to repaint a Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does it cost to repaint the side of a Fiat Panda? Read Answer
    • Panda 2003-2012 - Where is the color code plate of the Fiat Panda? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos