Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Panel on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Body

Good morning everyone, today we will see how to remove the rear panel on a Fiat Panda. This operation can be useful when we need to work on the wiper motor, but it can also serve other purposes. To remove the panel, get a hex key and unscrew (if you cannot unscrew with your hands, use pliers) the two screws located under the recess that facilitates the door opening. Once done, you can pull the panel and release all the clips that still hold it in place. Once completed, you are done.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2012-2026 / 319, MK 3) Removing the rear bumper of your Fiat Panda may seem like a very complex operation, but in reality all you need to do is follow the following procedu…
Fiat Panda (2012-2026 / 319, MK 3) In this tutorial we can see how to remove the rear door panel in the Fiat Panda, a very simple and quick operation. First of all, we open the door we…
Fiat Panda (2003-2012 / 169, MK 2) How to remove and replace the air filter on a Fiat Panda? Here’s how to proceed: open the car door, pull up the engine compartment release lever loca…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the inertia switch on the Fiat Panda? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos