Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs in the Rear Light of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Tail light bulb

Learn how to remove the rear light on a Fiat Panda and replace the bulbs. Open the boot lid, and remove the plastic cover located at the sides of the compartment (if present on the model). Once these steps are completed, unscrew the securing screws located at the side of the light; remove the light from its housing (disconnect the power connectors), replace the damaged bulbs with new ones (same voltage and size as the original). Finally, refit the new light, screw in the securing screws, and close with the plastic cap. Test the lights to ensure they work correctly.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Fiat Panda
How to Remove the Rear Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video, learn how to remove the rear light on a Fiat Panda along with the associated bulbs. Open the boot and remove the plastic cover located…
How to Replace the Rear Light in a Fiat Panda
How to Replace the Rear Light in a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Before you start, open the boot of your Fiat Panda. Begin by unscrewing and removing the screws that secure the rear light to the vehicle. Then, dise…
Remove the Rear Light of the New Panda
Remove the Rear Light of the New Panda
Fiat Panda (2012-2026 / 319, MK 3) How to remove the rear light on a Fiat Panda? Let's look at removing the plastic covers of the rear light. Lift the boot, and locate the screws to be…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos