Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wipers on the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Windshield wipers

Below are the instructions that will allow you to remove and replace the front wipers on the Fiat Panda. First, move to the front of the vehicle and begin to lift the wiper arms; then rotate the wiper and press the clip to detach it and remove it from the arm, as shown in the video. At this point, install the new front wiper, securing it properly onto the arm; gently lower the wiper onto the windscreen, replacing the other front wiper in the same way and, if necessary, also the rear wiper.

Posted on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on the Fiat Panda?
How to Replace the Wiper Blades on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the wiper blades on the Fiat Panda, press the hook that secures the blade to its arm and remove the blade itself. To fit the new blade, si…
How to Replace the Wiper Blades on a Fiat Panda?
How to Replace the Wiper Blades on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Replacing the wiper blades on a Fiat Panda is a very simple and quick task. First, switch off the vehicle and position the wipers in the rest positio…
How to Replace Wiper Blades on a Fiat Panda 169
How to Replace Wiper Blades on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will replace the front and rear wiper blades on a second-generation Fiat Panda 169 in simple steps. First, start by removing an…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the Fiat Panda wiper fluid reservoir located? Read answer

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos