Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Brake Discs and Pads on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Brake pads

In this video tutorial, see how to replace the front brake discs and pads on a Fiat Panda. First, loosen the wheel bolts, then lift the car with a hydraulic jack and place safety stands. Unscrew the wheel bolts and remove the front wheel. Apply some penetrating oil to the pins and use a 13 mm spanner to detach the caliper. Now unscrew the locating pins that you lubricated earlier. Give the hub a few taps to free it. Using a 19 mm spanner, remove the caliper bracket. At this point, following the reverse procedure, fit the new disc and pads.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Discs on a Fiat Panda
How to Replace the Front Brake Discs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you replace the front brake pads on a Fiat Panda? Position the car on a column lift or use a jack, raising it to a comfortable height for work…
How to Replace the Front Brake Pads on a Fiat Panda 169
How to Replace the Front Brake Pads on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows the steps to remove and replace the front brake pads on a Fiat Panda 169, second series. First, remove the front wheel by lifting th…
Replacing Brake Pads and Discs on a Fiat Panda
Replacing Brake Pads and Discs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's look at replacing the brake disc and associated pads on a Fiat Panda. Lift the car to a comfortable working height, unscrew the bolts with a so…

    Frequently Asked Questions

    • Panda 2012-2026 - How much does it cost to replace the brake pads of a Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos