Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Maintenance Light on the Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Warning light – error code

In this video tutorial, you will see how to reset the ordinary maintenance light on a Dacia Duster. First, get in the vehicle and turn the ignition on by turning the key: press the button located on the side lever and hold it down (for about twenty seconds until the mileage is reset to the display reading 20,000, which indicates the new miles you can drive). At this point, you can release and turn off the ignition: turn it back on and check that the light has indeed been reset; if not, repeat the operation.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Duster (2010-2017 / HS, MK 1) In this video, you will learn how to reset the maintenance light on a Dacia Duster. First, switch off the vehicle and remove the keys from the igniti…
Dacia Duster (2017-2024 / HM, MK 2) How to reset the maintenance light when it comes on in a Dacia Duster? The maintenance light indicates when a service is due after a certain distance…
Dacia Duster (2010-2017 / HS, MK 1) When a vehicle's light with the symbol of a spanner in amber colour illuminates, it indicates that a service is required at the workshop. After compl…

    Frequently Asked Questions

    • Duster 2017-2024 - How to recover the radio code of a Dacia Duster? Read answer
    • Duster 2017-2024 - What is the meaning of the red lights on the Dacia Duster? Read answer
    • Duster 2017-2024 - What does the Dacia Duster zigzag line warning light mean? Read answer
    • Duster 2017-2024 - What to do if the anti-pollution warning light comes on on the Dacia Duster? Read answer
    • Duster 2017-2024 - What are the spies of the Dacia Duster? Read answer
    • Duster 2010-2017 - Where to find the radio code on Dacia Duster? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos