Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the front hood of the Audi A3?

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Body

In case it is necessary to open the front hood to perform maintenance on an Audi A3 vehicle, we have prepared this short video tutorial. To open the front hood, you will first need to lift the opening lever located inside the cabin, near the door. Once you pull the lever, you will see the hood lift slightly. Go outside the car and insert your hand in the center of the hood, push the internal lever to the right, and open the hood. To keep it still, prop the hood with the rod. To close it, simply let it go firmly but not too forcefully.

Posted on 6 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on an Audi A3
How to Replace the Air Filter on an Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Learn how to remove the engine air filter on an Audi A3: open the car door, pull up the engine compartment release lever located at the bottom left o…
How to Replace the Engine Air Filter on an Audi A3
How to Replace the Engine Air Filter on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Let’s look at replacing the engine air filter on an Audi A3. Open the car door, pull up the engine compartment release lever located at the bottom le…
How to Remove the Engine Air Filter on an Audi A3
How to Remove the Engine Air Filter on an Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Learn how to remove and replace the engine air filter fitted on an Audi A3. Open the car door, pull up the engine compartment release lever located a…

Remove a Rear Light from a Volkswagen Touran

Remove a rear light from a Volkswagen Touran to replace the damaged bulbs. Open the boot lid, and using a lever, remove the plastic cover of the rear light. Unscrew the securing bolts located at the side of the rear light with a screwdriver (using a socket spanner or screwdriver with a bit). Once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Finally, reassemble the light and reverse the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos