Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Fan from a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

Learn how to remove the air fan from a Nissan Juke. Open the glove compartment and disconnect the end stop brackets, then unscrew the securing screws with a screwdriver. Unscrew the side screws in the glove compartment and remove the plastic door.

Unscrew the screws again, and after disconnecting the power wires, pull the glove compartment out from the dashboard. Remove the fan after disconnecting the power wires.

Clean the fan as necessary (disassemble the fan and its parts). Finally, reinstall the previously removed fan (new fan) and all its components under the glove compartment.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan on the Nissan Juke
How to Replace the Cabin Fan on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) This guide outlines the main instructions on how to remove and replace the cabin fan on the Nissan Juke. First, open the driver's side front door and…
Guide to Removing the Cabin Fan of the Nissan Juke
Guide to Removing the Cabin Fan of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) We will briefly go over the main steps to help you in the process of removing and replacing the cabin fan of the Nissan Juke. First, get inside the v…
How to Replace the Cabin Fan on a Nissan Juke
How to Replace the Cabin Fan on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the cabin fan on a Nissan Juke, open the glove compartment located on the passenger side and loosen the screws inside. Once these screws a…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos