Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Fan of the Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Blower motor

We will briefly go over the main steps to help you in the process of removing and replacing the cabin fan of the Nissan Juke. First, get inside the vehicle and start by removing the glove compartment, unscrewing the fixing screws located on the sides. You will find the cabin fan at the back, as shown in the video. Now disconnect the electrical connector of the fan and unscrew the screws to remove it, replacing it with a new one if necessary; then check the operation of the fan at various speeds, finally reassembling the glove compartment!

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan on the Nissan Juke
How to Replace the Cabin Fan on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) This guide outlines the main instructions on how to remove and replace the cabin fan on the Nissan Juke. First, open the driver's side front door and…
How to Replace the Cabin Fan on a Nissan Juke
How to Replace the Cabin Fan on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the cabin fan on a Nissan Juke, open the glove compartment located on the passenger side and loosen the screws inside. Once these screws a…
How do you replace the cabin fan of the Nissan Juke?
How do you replace the cabin fan of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) It will be possible to replace the cabin fan of the Nissan Juke by loosening the screws and removing the pins that secure the panel located under the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos