Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan on a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Blower motor

To replace the cabin fan on a Nissan Juke, open the glove compartment located on the passenger side and loosen the screws inside. Once these screws are loosened, you can remove the entire glove compartment to access the components at the back. The fan will be located on the left side and can be removed after loosening the fixing screws and disconnecting the relevant connectors. Once the old fan is removed, you can replace it with a new one and reassemble the glove compartment.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan on the Nissan Juke
How to Replace the Cabin Fan on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) This guide outlines the main instructions on how to remove and replace the cabin fan on the Nissan Juke. First, open the driver's side front door and…
Guide to Removing the Cabin Fan of the Nissan Juke
Guide to Removing the Cabin Fan of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) We will briefly go over the main steps to help you in the process of removing and replacing the cabin fan of the Nissan Juke. First, get inside the v…
How do you replace the cabin fan of the Nissan Juke?
How do you replace the cabin fan of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) It will be possible to replace the cabin fan of the Nissan Juke by loosening the screws and removing the pins that secure the panel located under the…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos