Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan on the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

This guide outlines the main instructions on how to remove and replace the cabin fan on the Nissan Juke. First, open the driver's side front door and remove the plastic panel behind the pedals; then remove the clutch pedal to subsequently take out the cabin fan, disconnecting the wiring and unscrewing the securing screws, as shown in the video.

At this point, carry out the repair or replacement of the cabin fan, securing it properly and checking its operation; then refit everything!


Posted on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan on a Nissan Juke
How to Replace the Cabin Fan on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the cabin fan on a Nissan Juke, open the glove compartment located on the passenger side and loosen the screws inside. Once these screws a…
Guide to Removing the Cabin Fan of the Nissan Juke
Guide to Removing the Cabin Fan of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) We will briefly go over the main steps to help you in the process of removing and replacing the cabin fan of the Nissan Juke. First, get inside the v…
How do you replace the cabin fan of the Nissan Juke?
How do you replace the cabin fan of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) It will be possible to replace the cabin fan of the Nissan Juke by loosening the screws and removing the pins that secure the panel located under the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos