Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Clutch

Replacing the clutch on a car engine is a rather complex task. Here are the most important steps to carry out, aided by the video tutorial. First, remove the front left wheel and lift the vehicle. Then, unscrew the transmission oil cap and collect the used oil in a container. Next, remove the steering joints and the hub. Then, take out the driveshaft and start unscrewing the fastening bolts of the transmission and gearbox assembly. Remove the clutch cable and be cautious when extracting the gearbox assembly due to its considerable weight. At this point, you will have access to the clutch assembly and can remove the clutch disc and pressure plate.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the clutch of the Nissan Juke Nismo 1.6 DIG-T
Guide to disassembling the clutch of the Nissan Juke Nismo 1.6 DIG-T
Nissan Juke (2010-2019 / MK 1) In this guide we will see the main instructions that will allow us to disassemble and replace the clutch kit of the Nissan Juke Nismo 1.6 DIG-T. Firs…
How to Replace the Cabin Fan on the Nissan Juke
How to Replace the Cabin Fan on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) This guide outlines the main instructions on how to remove and replace the cabin fan on the Nissan Juke. First, open the driver's side front door and…
How to Replace the Diesel Filter in the Nissan Juke
How to Replace the Diesel Filter in the Nissan Juke
Nissan Juke (2010-2019 / MK 1) In today's video, you will see how to independently replace the diesel filter in the Nissan Juke 1.5 dCi. First, allow the vehicle to cool down, then…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos